Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Mercury MontereyFACTORY OEM SERVICE PROCEDURE
Torque Specifications
WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Intermediate shaft-to-gear pinch bolt | 30 | 22 | - |
| Steering gear line clamp plate bolt | 18 | 13 | - |
| Steering gear-to-crossmember nuts | 103 | 76 | - |
| Steering gear-to-crossmember studs | 20 | 15 | - |
| Reservoir bolt | 12 | 9 | - |
| Pressure line fitting-to-pump | 65 | 48 | - |
| Pressure line bracket-to-engine nut | 7 | - | 62 |
| Power steering pump bolts | 25 | 18 | - |
| Radiator bracket bolts | 12 | 9 | - |
| Condenser-to-radiator nuts | 15 | 11 | - |
| Inner tie rod | 100 | 74 | - |
| Outer tie-rod end nuts | 80 | 59 | - |
| Outer tie-rod end jam nut | 55 | 41 | - |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.