Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Mercury MarauderFACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Brake shift interlock solenoid bolts | 9 | - | 80 |
| Ignition switch bolts | 7 | - | 62 |
| Lock cylinder housing screws | 22 | 16 | - |
| Parking brake release switch screws | 3 | - | 27 |
| Shift tube bolts | 9 | - | 80 |
| Steering column lower bearing retainer bolts | 9 | - | 80 |
| Steering column support nuts | 15 | 11 | - |
| Steering wheel bolt | 40 | 30 | - |
| Transmission selector lever arm and support | 15 | 11 | - |
| Upper intermediate shaft to lower intermediate shaft bolt | 48 | 35 | - |
| Upper intermediate shaft-to-column isolator pinch bolt | 30 | 22 | - |
| Lower intermediate shaft-to-steering gear pinch bolt | 30 | 22 | - |
| Dash seal and bearing nuts | 9 | - | 80 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.