Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Mercury Sable LS PremiumFACTORY OEM SERVICE PROCEDURE
Steering Column: Specifications
General Specifications
| Item | Specification |
|---|---|
| Ignition Lock Grease F0AZ-19584-A | ESA-M1C232-A |
| Rust Penetrant and Inhibitor F2AZ-19A501-A | ESR-M99C56-A |
| Steering Gear Grease C3AZ-19578-A | ESW-M1C87-A |
TORQUE SPECIFICATIONS
| Description | Nm | Lb-Ft | Lb-In |
|---|---|---|---|
| Brake shift interlock solenoid bolts | 9 | --- | 80 |
| Ignition switch bolts | 6 | --- | 54 |
| Instrument panel opening cover support bolts | 15 | 11 | --- |
| Lock cylinder housing screws | 22 | 17 | --- |
| Shift tube bolts | 9 | --- | 80 |
| Steering column lower bearing retainer bolts | 9 | --- | 80 |
| Steering column nuts | 15 | 11 | --- |
| Steering column shaft bolts | 48 | 36 | --- |
| Transmission selector lever arm and support bolts | 15 | 11 | --- |
| Instrument panel opening cover bolts | 15 | 11 | --- |
| Steering wheel pinion shaft | 18 | 13 | --- |
| Steering column finish panel screws | 7 | --- | 62 |
| Steering column coupler bolts | 25 | 18 | --- |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.