Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1999 Mercury Sable V6-3.0L DOHC VIN SFACTORY OEM SERVICE PROCEDURE
Seats: Specifications
| Front Seat Back Latch-To-Seat Back Screws | 20-25 Foot Pound-Force (ft.lb) |
| Latch-to-Seat Track Bolts | 33-44 Foot Pound-Force (ft.lb) |
| Seat Track To Floor Bolts | 14-19 Foot Pound-Force (ft.lb) |
| Rear Outboard Nuts | 14-19 Foot Pound-Force (ft.lb) |
| Rear Inboard Nut | 51-67 Foot Pound-Force (ft.lb) |
| Seat Track-to-Cushion Bolts | 107-212 Inch Pound-Force (in.lb) |
| Seat Track-to-Floorpan Bolts | 14-19 Foot Pound-Force (ft.lb) |
| Strap and Buckle Assy Nut | 23-29 Foot Pound-Force (ft.lb) |
| Rear Seat Pivot Frame Nuts | 17-23 Foot Pound-Force (ft.lb) |
| Seat Back Bolts | 22-28 Foot Pound-Force (ft.lb) |
| Rear Seat Back-to-Floorpan Bolts | 29-37 Foot Pound-Force (ft.lb) |
| Auxiliary Seat-to-Floorpan Screws | 13-16 Foot Pound-Force (ft.lb) |
| Rear Seat Back Latch-to-Rear Seat Back Bolts and Nuts | 29-37 Foot Pound-Force (ft.lb) |
| Auxiliary Seat-to-Floor Pan Nuts | 51-67 Foot Pound-Force (ft.lb) |
| Rear Seat Back Center Armrest Link and vertical Strainer to Rear Seat Back Pad and Frame Nuts | 36-53 Inch Pound-Force (in.lb) |
| Seat Back-to-Cushion Pivot Screw | 14-19 Foot Pound-Force (ft.lb) |
| Seat Back-to-Latch Screws | 33-44 Foot Pound-Force (ft.lb) |
| Front Seat Center Armrest Console Mounting Bolts | 14-19 Foot Pound-Force (ft.lb) |
| Center Seat Safety Belt Mounting Nuts | 58-67 Foot Pound-Force (ft.lb) |
| Outboard Retaining Screws | 23-31 Foot Pound-Force (ft.lb) |
| Child Seat pivot pin | 7-11 Foot Pound-Force (ft.lb) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.