Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1993 Mercury Capri Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Control Module Circuit Function
CONTROL MODULE CIRCUIT FUNCTION
| Pin | Color | Function |
|---|---|---|
| A | RED/WHT | Flash To Pass Switch Feed |
| B | RED/BLK | Flash To Pass Switch Feed |
| C | BLK | RH Door Motor |
| D | WHT | Lift Switch Feed |
| E | WHT | RH Door Motor |
| F | RED | RH Door Motor |
| G | GRN | RH Door Motor |
| H | BRN | RH Door Motor |
| J | WHT/GRN | Vehicle Power |
| K | GRN | LH Door Motor |
| L | BLK | Ground |
| M | BRN | LH Door Motor |
| N | BLK | Ground |
| O | WHT | LH Door Motor |
| P | BLK | Ground |
| Q | RED | LH Door Motor |
| R | BLU | LH Door Motor |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.