Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
PW10: Check Passenger Switch Circuit Continuity
Turn the ignition key to the OFF position. Disconnect the power window main switch. Disconnect the passenger switch for the window that is not working. Measure the resistance between the main switch connector and passenger switch connector of the window that is not working, see POWER WINDOW SWITCH CONNECTOR . Is the resistance less than 5 ohms? If yes, go to the next step. If no, service the circuit in question between the main switch and the passenger switch for open.
| Power Window | Main Switch Connector | Passenger Switch Connector |
|---|---|---|
| Right Front | Green/White, Red/White | Green/White, Red/White |
| Right Rear | Blue/White, Yellow/White | Blue/White, Yellow/White |
| Left Rear | Green/Yellow, White/Red | Blue/White, Yellow/White |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.