Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1992TOPAZ LS, 3.0 U, AUTOMATIC, FLCREPAIR AND DIAGNOSISQUICK LOOKUPSFLUIDS
1992 Mercury Topaz LS, 3.0 U, Automatic, FLC
Quick Lookups: Fluids
1992 Mercury Topaz LS, 3.0 U, Automatic, FLCSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 2.25 LBS. | 1.02 KG | R-12 | S | |||
| Automatic Transmission Fluid | 8.50 QTS. | 8.04 L | Automatic Transmission Fluid MERCON | S | |||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | Fill to line on reservoir. | S | ||
| Engine Coolant | Automatic Trans | 8.40 QTS. | 7.94 L | 50/50 mixture of FORD Premium Cooling System Fluid and water | Add .5 qt. to Coolant Recovery Reservoir. | S | |
| Engine Oil | 3.0L Eng | 4.50 QTS. | 4.25 L | SAE 5W-30 (Preferred) (Below -20Deg.F to 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) | S | ||
| Fuel Tank | Optional | 14.20 GALS. | 53.75 L | S | |||
| Fuel Tank | Standard | 15.90 GALS. | 60.18 L | S | |||
| Manual Transmission Fluid | 6.40 PTS. | 3.02 L | Automatic Transmission Fluid MERCON | S | |||
| Power Steering Fluid | 1.80 PTS. | 0.85 L | Automatic Transmission Fluid Type F | S | |||
| Windshield Washer Fluid | N/A | N/A | Ultra-Clear Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.