Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1983 Mercury Capri Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Normally Open Valve
- With engine at normal operating temperature, parking brake applied and transmission in "P" or "N," disconnect hoses from outlets "A" and "B." See Figure . Disconnect and plug vacuum line to ports "D" and "S".
- With engine at 1500 RPM, air should flow out of port "B." Apply 8-10 in. Hg vacuum to port "S." With engine at 1500 RPM, air should flow from port "A".
- Reconnect line to port "D" and ensure vacuum is present. With engine at 1500 RPM, air should flow from bypass vents. If valve fails any of these tests, replace valve. Reconnect hoses.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.