Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Accelerator Pedal Module Control Unit, Component Description - GF07.08-P-2000MRP
Engine 274.9 in model 213.050/053/153
up to model year 2021
View of accelerator pedal module
Location
The accelerator pedal module control unit is integrated in the accelerator pedal module.
Task
The accelerator pedal module control unit has the task of providing the driver with haptic feedback on the position of the accelerator pedal. Depending on the driving mode, the pedal angle to be selected in order to facilitate the functions "Electric mode metering" and "Anticipatory electric gliding" is signaled to the driver.
Function
The accelerator pedal module control unit directly actuates the accelerator pedal module actuator motor. Via a linkage, this generates a low counterforce to the force of the driver on the accelerator pedal. Depending on the driving situation, this counterforce is perceived as a pressure point or a double impulse. The position of the accelerator pedal module actuator motor is monitored by the accelerator pedal module control unit.
The accelerator pedal module consists of 2 modules (accelerator pedal module control unit and pedal angle sensor).
| Wiring diagram for powertrain control unit | N127 | PE54.21-P-2141-97DBA |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
