Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2017 Mercedes Benz GLS450FACTORY OEM SERVICE PROCEDURE
Table Of Contents For Function Description - Hybrid Drive System - GF08.30-P-0999GRH
Engine 276.821 in model 166
| Hybrid drive system, function | GF08.30-P-0001GRH | ||
| Hybrid drive system energy flow-pictures | GF08.30-P-0001-02GRH | ||
| Hybrid drive system Display of charge level of high-voltage battery | GF08.30-P-0001-10GRH | ||
| Start hybrid drive system, function | GF08.30-P-1003GRH | ||
| Deactivation of hybrid drive system, function | GF08.30-P-1004GRH | ||
| Energy management for hybrid drive system, function | GF08.30-P-1005GRH | ||
| Driving, function | GF08.30-P-2002GRH | ||
| Deceleration mode, function | GF08.30-P-2004GRH | ||
| Hybrid drive system test conditions, function | GF08.30-P-2005GRH | ||
| Automatic engine stop, function | GF08.30-P-3001GRH | ||
| Automatic engine start, function | GF08.30-P-3002GRH | ||
| Torque coordination for a hybrid drive system, function | GF08.30-P-4001GRH | ||
| Monitoring a hybrid drive system, function | GF08.30-P-5001GRH | ||
| High-voltage system cooling, function | GF20.00-P-2220GRH | ||
| Recuperative braking, function | GF42.22-P-1010GRH | ||
| Stationary charging function | GF54.10-P-0010GRH | ||
| Overview of system components, hybrid drive system | GF08.30-P-9999GRH |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
