Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2017 Mercedes Benz GLS450FACTORY OEM SERVICE PROCEDURE
Table Of Contents For Function Description Of Transfer Case (VG) - GF28.10-P-0999VGF
MODEL 166 with TRANSMISSION 724.2
MODEL 166 with TRANSMISSION 725.0
as of model year 2016
MODEL 292 with TRANSMISSION 725.0
| Transfer case (VG), function | GF28.10-P-0002VGF | ||
| Transfer case (VG), power flow | MODEL 166 with TRANSMISSION 725.0 as of model year 2016 with CODE 430 (On & off-road package) |
GF28.10-P-0002-05VGF | |
| MODEL 166 with TRANSMISSION 725.0 as of model year 2016 without CODE 430 (On & off-road package) |
GF28.10-P-0002-05VGG | ||
| Transfer case (VG), technical data | GF28.10-P-0002-07VGF | ||
| Transfer case control, function | MODEL 166 with TRANSMISSION 725.0 as of model year 2016 with CODE 430 (On & off-road package) |
GF28.19-P-3000VGF | |
| Downhill Speed Regulation, function | GF28.19-P-3600VGF | ||
| Offroad transmission mode, function | GF28.19-P-3601VGF | ||
| Transfer case oil supply, function | GF28.55-P-3000VGF | ||
| "Low/High" shift mechanism, function | MODEL 166 with TRANSMISSION 725.0 as of model year 2016 with CODE 430 (On & off-road package) |
GF28.60-P-1000VGF | |
| Interaxle differential lock, function | MODEL 166 with TRANSMISSION 725.0 as of model year 2016 with CODE 430 (On & off-road package) |
GF28.60-P-3100VGF | |
| Overview of system components, transfer case (VG) | GF28.10-P-9998VGF |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
