Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Mercedes Benz C63 AMGFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.00 OZS. | 0.11 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.35 LBS. | 0.61 KG | R-134a | S | |||
| Automatic Transmission Fluid | 7.50 QTS. | 7.09 L | Automatic Transmission Fluid Specification: 236.14 | Only use products recommended by Mercedes Benz. Approximate capacity. | S | ||
| Brake Fluid | 0.53 QTS. | 0.5 L | MB Brake Fluid | Only use products recommended by Mercedes Benz. | S | ||
| Engine Coolant | Low Temperature Circuit | 4.85 QTS. | 4.58 L | MB 325.0 or MB 326.0 Anticorrosion/Antifreeze | S | ||
| Engine Coolant | Main Circuit | 11.75 QTS. | 11.11 L | MB 325.0 or MB 326.0 Anticorrosion/Antifreeze | S | ||
| Engine Oil | w/Filter | 9.50 QTS. | 8.99 L | MB Approved Synthetic Engine Oil - SAE 5W-40 or 0W-40 | Use Mercedes-Benz approved engine oil only. See bulletin No. S-0473-08B (Mercedes-Benz Factory Approved Service Products). | S | |
| Fuel Tank | 17.40 GALS. | 65.86 L | Includes: a reserve of 3.7 gal. | S | |||
| Windshield Washer Fluid | 3.70 QTS. | 3.5 L | MB Windshield Washer Concentrate "MB Summer Fit" and water for temperatures above freezing or MB "MB Winter Fit" and water for temperatures below freezing. | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.