Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Mercedes Benz ML350 BaseFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 3.70 OZS. | 0.1 L | PAG 46 | S | |||
| Air Cond Refrigerant | Front | 2.15 LBS. | 0.97 KG | R-134a | S | ||
| Air Cond Refrigerant | w/Rear A/C | 2.65 LBS. | 1.2 KG | R-134a | S | ||
| Brake Fluid | N/A | N/A | MB Brake Fluid | Only use products recommended by Mercedes Benz. | S | ||
| Diesel Exhaust Fluid | Initial Fill | 7.45 GALS. | 28.2 L | Approved NOx reducing agent "AD Blue" | Approximate capacity. | S | |
| Diesel Exhaust Fluid | Service Fill | 7.05 GALS. | 26.68 L | Approved NOx reducing agent "AD Blue" | Approximate capacity. | S | |
| Engine Coolant | 10.00 QTS. | 9.46 L | MB 325.0 Anticorrosion/Antifreeze | S | |||
| Engine Oil | Base | w/Filter | 8.50 QTS. | 8.04 L | MB Approved Synthetic Engine Oil - SAE 0W-30, 5W-30, 5W-40 or 0W-40 | Use Mercedes-Benz approved engine oil only. See bulletin No. S-0473-08B (Mercedes-Benz Factory Approved Service Products). | S |
| Fuel Tank | 25.10 GALS. | 95.01 L | Includes: a reserve of 3.4 gal. | S | |||
| Windshield Washer Fluid | w/Headlamp Cleaning System | 7.60 QTS. | 7.19 L | MB Windshield Washer Concentrate "MB Summer Fit" and water for temperatures above freezing or MB Windshield Washer Concentrate "MB Summer Fit" and commercially available premixed windshield washer solvent/antifreeze for temperatures below freezing point. | Follow the Manufacturer's Instructions for the mixture ratio. | S | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.