Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Mercedes Benz G55FACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.75 OZS. | 0.17 L | PAG 46 | S | |||
| Air Cond Refrigerant | 2.30 LBS. | 1.04 KG | R-134a | S | |||
| Brake Fluid | N/A | N/A | MB Brake Fluid | Only use products recommended by Mercedes Benz. | S | ||
| Engine Coolant | 13.40 QTS. | 12.68 L | MB 325.0 corrosion inhibitor/antifreeze agent | S | |||
| Engine Oil | w/Filter,AMG | 9.00 QTS. | 8.51 L | MB Approved Synthetic Engine Oil - SAE 5W-40 or 0W-40 | Use Mercedes-Benz approved engine oil only. See bulletin No. S-0473-08B (Mercedes-Benz Factory Approved Service Products). | S | |
| Fuel Tank | 25.10 GALS. | 95.01 L | Includes: a reserve of 5.3 gal. | S | |||
| Power Steering Fluid | 1.06 QTS. | 1 L | MB Power Steering Fluid or Automatic Transmission Fluid DEXRON III | S | |||
| Windshield Washer Fluid | w/Headlamp Cleaning System | 7.40 QTS. | 7 L | MB Windshield Washer Concentrate "MB Summer Fit" and water for temperatures above freezing or MB Windshield Washer Concentrate "MB Summer Fit" and commercially available premixed windshield washer solvent/antifreeze for temperatures below freezing point. | Follow the Manufacturer's Instructions for the mixture ratio. | S | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.