Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Mercedes Benz CL65FACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 3.70 OZS. | 0.1 L | PAG 46 | S | |||
| Air Cond Refrigerant | 2.35 LBS. | 1.06 KG | R-134a | S | |||
| Automatic Transmission Fluid | 9.20 QTS. | 8.7 L | MB Automatic Transmission Fluid | Use Mercedes-Benz approved automatic transmission fluid only. See bulletin No. S-0473-08B (Mercedes-Benz Factory Approved Service Products). | S | ||
| Brake Fluid | 0.53 QTS. | 0.5 L | DOT 4+ MB Brake Fluid | S | |||
| Differential Gear Oil | Rear | 1.69 QTS. | 1.59 L | SAE 85W-90 Hypoid Gear Oil | S | ||
| Engine Coolant | 14.70 QTS. | 13.91 L | MB 325.0 Anticorrosion/Antifreeze | S | |||
| Engine Oil | w/Filter,AMG | 9.51 QTS. | 8.99 L | MB Approved Synthetic Engine Oil - SAE 5W-40 or 0W-40 | Use Mercedes-Benz approved engine oil only. See bulletin No. S-0473-08B (Mercedes-Benz Factory Approved Service Products). | S | |
| Fuel Tank | 23.78 GALS. | 90.01 L | Includes: a reserve of 3.7 gal. | S | |||
| Power Steering Fluid | 1.27 QTS. | 1.2 L | MB Power Steering Fluid (Chevron Texaco PSF 9109) | S | |||
| Windshield Washer Fluid | 6.87 QTS. | 6.5 L | MB Windshield Washer Concentrate "MB Summer Fit" and water for temperatures above freezing or MB Windshield Washer Concentrate "MB Summer Fit" and commercially available premixed windshield washer solvent/antifreeze for temperatures below freezing point. | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.