2007 Mercedes Benz SLK280 AutomaticFACTORY OEM SERVICE PROCEDURE

Perform basic programming - AR00.19-P-0200V

MODEL 171.4 

  Adjust   
1.1 Set time on instrument cluster For vehicles without code (525) MB Audio 50 APS radio or
without code (527a) COMAND APS (with navigation).
IMPORTANT See Operating Instructions
2 Normalizing power windows IMPORTANT With a closed Vario roof move both windows up to the upper block position. Keep the switches of the driver power window switch group (S20/1) pressed in this position for at least 1 s.
3.1 Normalizing seats On vehicles with code (242b) Electrically adjustable front passenger seat with memory or with code (275a) Memory package (driver seat, steering column, mirrors)
IMPORTANT To normalize the seats the following stops have to be approached: front stop of the fore/aft adjustment, lower downstop of the inclination adjustment, lower downstop of the height adjustment, front stop of the backrest adjustment.
Keep the switches of the left seat adjustment switch group (S22) and the right seat adjustment switch group (S23) pressed for at least 1 s in the particular downstop points.
Chapter Navigation
Return to Chapter: Testing & Repair
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.