Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Mercedes Benz E320FACTORY OEM SERVICE PROCEDURE
System component overview, seat ventilation, location/task/design/function - GF91.30-P-9997T
MODELS 211.0/2/6 with CODE (401a) Front luxury seat, incl. heated seat and seat ventilation
| Heated seats/seat ventilation switch location/task | GF91.30-P-3004T | |
| Front seat ventilation motors, location/task/design/function | GF91.30-P-3100T | |
| Seat ventilation blower regulator, location/task/design/function | GF91.30-P-3102T | |
| Heated seats/seat ventilation control unit, location/task | GF91.30-P-3005T | |
| Upper control panel control unit, location/task/design/function | Models 211.0/6 | GF54.21-P-4105T |
| Model 211.2 | GF54.21-P-4105TS | |
| Electronic ignition/starter switch control unit, location/purpose | GF80.57-P-4120T | |
| Electronic seat ventilation function description, table of contents | GF91.30-P-0997T |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
