Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Lock-up recognition, function - GF91.29-P-3007T
MODELS 211.0/2/6 with CODE (275a) Memory package (driver's seat, steering column, mirrors) with CODE (242b) Electrically adjustable front passenger seat with memory
Function
If a motor is blocked during one of the adjusting functions triggered by the operating switch or while setting to a stored position, it is switched off after approx. 2.5 s.
Re-enabling in the same adjusting direction is not permitted until the switch has been released for approx. 2.5 s.
A restart in the opposite direction of adjustment is possible right away.
| Seat adjusting motors position measurement function | GF91.29-P-4000T |
| Motor group for front seat adjustment with memory, location/body | GF91.29-P-2105T |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
