2007 Mercedes Benz CLK63FACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 4.00 OZS. 0.11 L PAG 46 S
Air Cond Refrigerant 1.65 LBS. 0.74 KG R-134a S
Automatic Transmission Fluid 9.30 QTS. 8.8 L MB Automatic Transmission Fluid S
Brake Fluid 0.64 QTS. 0.6 L DOT 4+ MB Brake Fluid S
Differential Gear Oil Rear 1.27 QTS. 1.2 L Fuchs Titan EG 5010D S
Engine Coolant 11.50 QTS. 10.88 L MB 325.0 Anticorrosion/Antifreeze S
Engine Oil w/Filter,AMG 9.00 QTS. 8.51 L MB Approved Synthetic Engine Oil - SAE 5W-40 or 0W-40 Use Mercedes-Benz approved engine oil only. See bulletin No. S-0473-08B (Mercedes-Benz Factory Approved Service Products). S
Fuel Tank 16.35 GALS. 61.89 L Includes: a reserve of 3.17 gal. S
Power Steering Fluid 1.30 QTS. 1.23 L MB Power Steering Fluid (Pentosin CHF 11S) S
Windshield Washer Fluid Heater Windshield Washer System,Headlamp Cleaning System 6.40 QTS. 6.05 L MB Windshield Washer Concentrate "MB Summer Fit" and water for temperatures above freezing or MB Windshield Washer Concentrate "MB Summer Fit" and commercially available premixed windshield washer solvent/antifreeze for temperatures below freezing point. Follow the Manufacturer's Instructions for the mixture ratio. S
Windshield Washer Fluid Windshield Washer System 3.20 QTS. 3.02 L MB Windshield Washer Concentrate "MB Summer Fit" and water for temperatures above freezing or MB Windshield Washer Concentrate "MB Summer Fit" and commercially available premixed windshield washer solvent/antifreeze for temperatures below freezing point. Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.