2003 Mercedes Benz CLK430FACTORY OEM SERVICE PROCEDURE

Current Consumption

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 Mercedes-Benz ML320, 2002 Mercedes-Benz E320, 2002 Mercedes-Benz CLK320, 2001 Mercedes-Benz ML320, and 2001 Mercedes-Benz E320. However, it is still accessible from the selected car via links, so may be relevant.

On CLK class and E class models, disconnect fuel pump relay (K27). Connect DVOM to fuel pump relay socket terminals No. 2 and 8. On ML320, disconnect fuel pump relay (k3). Connect DVOM to fuel pump relay socket terminals No. 30 and 87. On all models, turn ignition on. DVOM should indicate 4-9 amps. If amperage is within specification, test is complete. If amperage is not within specification, possible cause is faulty fuel pump. Repair as necessary.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.