2003 Mercedes Benz CLK430FACTORY OEM SERVICE PROCEDURE

Performing basic programming - AR00.19-P-0200C

MODELS 202, 208 

  Adjusting     
1 Set time on instrument cluster IMPORTANT See Operating Instructions  
2 Set clock of stationary heater IMPORTANT See Operating Instructions  
3 Normalize side power windows IMPORTANT Refer also to operating instructions.  
REFER TO BASIC KNOWLEDGE   IMPORTANT Model 202 as of 1.6.97 GF72.29-P-4003A
4 Activate steering angle sensor IMPORTANT Electronic stability program (ESP) Code (472a). AR46.10-P-0300-01A
    IMPORTANT Refer also to operating instructions.  
5 Synchronize sliding/pop-up roof IMPORTANT Refer also to operating instructions.  
REFER TO BASIC KNOWLEDGE   IMPORTANT Model 202 as of 1.6.97, Model 208 (except 208.435/445/447/465 as of 1.3.97) GF77.20-P-3002A
6 Code radio Becker 2000. AR82.60-P-7502-01A
    MB
IMPORTANT Refer also to radio operating instructions.		 AR82.60-P-7502-01B
Chapter Navigation
Return to Chapter: Testing & Repair
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.