2002 Mercedes Benz ML55FACTORY OEM SERVICE PROCEDURE

Vacuum Diagrams: Introduction

This article contains underhood views or schematics of vacuum hose routing. Use these vacuum diagrams during the visual inspection. This will assist in identifying improperly routed vacuum hoses, which cause driveability and/or computer-indicated malfunctions.

VACUUM DIAGRAM APPLICATION

Model Engine See Fig.
C230 Kompressor 111.981 (1)
C240 112.912 Fig 1
C320 112.946 Fig 1
C32 AMG 112.961 (1)
CL500 113.960 Fig 1
CL55 AMG 113.982 (1)
CL600 137.970 (1)
CLK320 112.940 Fig 1
CLK430 113.943 Fig 1
CLK55 AMG 113.984 (1)
E320 112.941 Fig 1
E430 113.940 Fig 1
E55 AMG 113.980 (1)
G500 113.962 (1)
ML320 112.942 Fig 1
ML500 113.965 Fig 1
ML55 AMG 113.981 (1)
S430 113.941 Fig 1
S500 113.960 Fig 1
S55 AMG 113.982 (1)
S600 137.970 (1)
SL500 113.961 Fig 1
SL600 120.983 Fig 2
SLK230 Kompressor 111.983 (1)
SLK320 112.947 Fig 1
SLK32 AMG 112.960 (1)
(1) Vacuum diagram is not available.
Fig 1: Vacuum Diagram (2002 2.6L V6, 3.2L V6, 4.3L V8 & 5.0L V8)
G00011619Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.