Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Enabling Code Function For Radio
After reconnecting power supply or radio, turn ignition on. CODE will be displayed. Enter 5-digit code number using alphanumeric keypad on radio. After entering code, press OK key. If incorrect code is entered, CODE will be displayed on radio. Enter code again. If wrong code is entered 3 times, WAIT will be displayed and code entry is denied for 10 minutes. Radio and ignition switch must remain on during the waiting period.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.