2000 Mercedes Benz S430FACTORY OEM SERVICE PROCEDURE

Fuel Level Sender Collection (47.10/18)

Publication date: 2001-10-02
Reference number: 47.10/18

FUEL LEVEL SENDER COLLECTION

FUEL LEVEL SENDER COLLECTION

TECHNICAL SERVICE BULLETIN

Reference Number(s): P-B-47.10/18, Date of Issue:  October 2, 2001
MERCEDES-BENZ: Models 202, 208, 129, 210, 220, 215
GROUP: 47 - Fuel Tank, Lines

SUBJECT

Fuel Level Sender Collection

SERVICE INFORMATION

To help gauge the performance of the newly introduced fuel level senders listed below, please contact your regional Technical Specialist whenever any of the listed parts are removed from a vehicle with respect to fuel level mis-read conditions. These parts will be listed on your warranty parts scrap report, but please do not scrap them until a Technical Specialist has had the opportunity to inspect them.

Please note that only the listed part numbers, using the part number on the part itself, should be held for inspection. Do not use the part number from the scrap report, as this reflects only the part number that was installed.

  1. 129 542 11 17
  2. 202 470 39 41
  3. 208 470 06 41
  4. 210 542 41 17
  5. 220 542 14 17
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.