2000 Mercedes Benz E55FACTORY OEM SERVICE PROCEDURE

Relay module location/task/design/function - GF07.13-P-3101H

ENGINE 602.982 in MODEL 210.017 /217 /617 to 28.2.97 

ENGINE 604.912 in MODEL 210.004 to 28.2.97 

ENGINE 604.917 in MODEL 210.003 to 28.2.97 

ENGINE 605.912 in MODEL 210.010 /210 /610 to 28.2.97 

ENGINE 606.912 in MODEL 210.020 

Fig 1: Identifying Relay Module Location
G04623975Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  Relay module position In the control module box in the engine compartment  
  Relay module task
  • To supply power to the control modules and electrical components
  • To protect the circuit of control modules and electrical components
  • To energize the IFI [ERE] control module (N3/7) or DFI [ERE] control module (N3/8) when the ignition is OFF (self-holding control)
 
  Relay module design   GF07.13-P-3101-01H 
  Relay module function   GF07.13-P-3101-02H 
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.