2000 Mercedes Benz E55FACTORY OEM SERVICE PROCEDURE

Pressure sensor position/task/design/function - GF07.04-P-5014H

ENGINE 604.910 in MODEL 202.121 /182 

ENGINE 604.912 in MODEL 210.004 

ENGINE 604.915 in MODEL 202.122 /180 

ENGINE 604.917 in MODEL 210.003 

ENGINE 605.910 in MODEL 202.125 

ENGINE 605.912 in MODEL 210.010 /210 /610 

ENGINE 606.912 in MODEL 210.020 

ENGINE 602.982 in MODEL 210.017 /217 /617 

ENGINE 606.961 in MODEL 140.135 

ENGINE 606.962 in MODEL 210.025 /225 

ENGINE 605.960 in MODEL 202.128 /188 

ENGINE 605.962 in MODEL 210.015 /215 

Location in model 202 

Fig 1: Identifying Pressure Sensor Position In Model 202
G04623863Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  Pressure sensor task To measure the intake manifold pressure/ charge air distribution pipe pressure and to supply the corresponding signals to the engine control module  
  Pressure sensor design   GF07.04-P-5014-03H 
  Pressure sensor function The pressure in the intake manifold/charge air distribution pipe alters the shape of the diaphragm and the piezo resistors alter their resistance. This influences the output voltage which acts as information to the engine control module regarding the pressure in the intake manifold/charge air distribution pipe.  
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.