2000 Mercedes Benz E55FACTORY OEM SERVICE PROCEDURE

Acceleration sensor position/task/design/function - GF07.04-P-4102L

ENGINE 119.980 in MODEL 140.050 /051 /070 up to 1.8.96 

ENGINE 119.981 in MODEL 140.042 /043 /063 up to 1.8.96 

ENGINE 119.982 in MODEL 129.067 up to 1.8.96 

ENGINE 119.985 in MODEL 210.072 /272 up to 1.8.96 

ENGINE 120.982 in MODEL 140.056 /057 /076 up to 1.8.96 

ENGINE 120.983 in MODEL 129.076 up to 1.8.96 

Position on model 140 

Fig 1: Identifying Body Acceleration Sensor Position - Model 140
G04623835Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Position on model 129 

Fig 2: Identifying Body Acceleration Sensor Position - Model 129
G04623836Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.