Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Automatic Level Control: Operation
As rear of vehicle is lowered due to added weight, the leveling valve lever raises to the filling position. This allows fluid to flow from pump to pressure reservoir then to special shock absorber, through check valves.
This added fluid will raise the rear of the vehicle until the leveling valve lever is moved back to the neutral position. When the added weight is removed, rear of vehicle raises which moves the leveling lever to the return flow position.
This allows the fluid in the special shock absorber to drain back into the reservoir until the leveling lever is back in the neutral position and the vehicle is level.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.