2024 Mazda 3 Preferred, 4D HatchbackFACTORY OEM SERVICE PROCEDURE

Reading Operation Records Of FSC: Functions

  • The operation record is stored by the forward sensing camera (FSC) and displayed using the Mazda Modular Diagnostic System (M-MDS).
  • The forward sensing camera (FSC) stores the following when the forward sensing camera (FSC) stops the operation.
    • Causes for forward sensing camera (FSC) stopping operation *1
    • Traveled distance
    • Ambient temperature
    • Forward sensing camera (FSC) internal temperature

*1: The cause of the forward sensing camera (FSC) to stop operating can be verified using the Mazda Modular Diagnostic System (M-MDS) as indicated in the following table. The causes are (1) an environmental factor and (2) a vehicle malfunction. In case of (1) an environmental factor, there is no problem with the forward sensing camera (FSC). In case of (2) a vehicle malfunction, perform a DTC inspection, as it is possible that there is a malfunction with the forward sensing camera (FSC).Β 

FORWARD SENSING CAMERA FUNCTION DESCRIPTION

M-MDS display item(1) Cause of forward sensing camera (FSC) to stop operating Display item explanation(2)
(1) Environmental factor (2) Vehicle malfunction cause
No Inhibition x x -
Full Blockage x - A
Partial Blockage x - A
Low Sun x - B
Sun Ray x - B
Blurred Image x - C
Splashes x - C
Foggy Lights x - B
Halos x - B
Smeared Spots x - B
Self Glare x - B
Over Temperature - x -
Out of Focus - x C
(1) Two of the causes which stop the forward sensing camera (FSC) from operating are always displayed using the Mazda Modular Diagnostic System (M-MDS). If there is one cause, [No Inhibition] is selected.

(2) The contents of the causes which stop the forward sensing camera (FSC) from operating are as follows.
  1. Light is blocked by dirty windshield (such as adhesion of leaves or mud)
  2. Vehicle is subjected to strong light from the vehicle front, light reflected multidirectionally on the forward sensing camera (FSC) lens surface is recognized as a foreign object or light reflects on the forward sensing camera (FSC) lens surface and white haze is recognized as a foreign object.
  3. Windshield/forward sensing camera (FSC) is dirty or screen image is distorted by occurrence of condensation (water droplets)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.