2021 Mazda CX-3 AWDFACTORY OEM SERVICE PROCEDURE

Power Door Lock System

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • There Are Two Types Of Personalization Procedures; One Using The M-Mds And The Other Using The Center Display.
Personalization Features Setting Contents Setting Procedure
Auto Door Lock Function Can Be Changed. Off/Lock: When Driving, Unlock: In Park./Lock When Driving./Lock: Driving, Unlock: Ign Off./Lock When Shifting Out Of P./Lock: Shift From P, Unlock: In P. M-Mds Is Used.
(See Security And Locks Personalization Features Setting Procedure .)
Off/Lock: When Driving, Unlock: In Park/Lock: When Driving/Lock: When Driving, Unlock: Ign Off/Lock: Shifting From Park/Lock: Shifting From Park, Unlock: In Park Center Display Is Used For The Setting.
(See Center Display Personalization Features Setting Procedure .)
Returns The Setting Content Of The Door Lock System To The Initial Setting. Yes/No Center Display Is Used For The Setting.
(See Center Display Personalization Features Setting Procedure .)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.