2021 Mazda CX-3 AWDFACTORY OEM SERVICE PROCEDURE

Intake-Air System Location Index

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Intake-Air System Components Location
G10968788Courtesy of MAZDA MOTORS CORP.
COMPONENT DESCRIPTION

1 Intake manifold
(See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
(See INTAKE MANIFOLD VACUUM INSPECTION .)
2 Air hose
(See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
3 Check valve
(See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
(See CHECK VALVE INSPECTION .)
4 Vacuum pump
(See VACUUM PUMP REMOVAL/INSTALLATION .)
(See VACUUM PUMP INSPECTION .)
5 Air cleaner
(See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
(See AIR CLEANER ELEMENT REMOVAL/INSTALLATION .)
(See AIR CLEANER ELEMENT INSPECTION .)
6 Resonance chamber
(See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
7 Fresh-air duct
(See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
8 Throttle body
(See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
(See THROTTLE BODY INSPECTION .)
9 Accelerator pedal
(See ACCELERATOR PEDAL REMOVAL/INSTALLATION .)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.