2021 Mazda CX-3 AWDFACTORY OEM SERVICE PROCEDURE

Related PIDs

Item (definition) Unit/Condition Definition Condition/Specification (Reference)
ECT °C, °F Engine coolant temperature input from ECT sensor No. 1
  • Displays ECT
V ECT sensor No. 1 voltage Ignition switched ON (engine off)
  • ECT is 29°C {84°F}: Approx. 2.65 V

Idle (after warm up)
  • ECT is 88°C {190°F}: Approx. 0.71 V
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.