2021 Mazda 3 BaseFACTORY OEM SERVICE PROCEDURE

Vehicle Status Monitor

  • Displays the vehicle status monitor information.

Vehicle Status Monitor verification procedure

  1. Select the "Information" button on the Home screen.
  2. Select [Vehicle Status Monitor] on the information screen to display the guidance.
  • The buttons on the menu screen operate as follows:
Item Explanation
Vehicle Warning Messages If there is a problem with the vehicle, information about the problem is displayed.
Next Service The next maintenance period is displayed.
Date
  • The date manually set by the customer is displayed.

Distance
  • If "Next Service Date" is set to "Automatic"
    • The "Distance Until Oil Change" content is displayed.
  • If "Next Service Date" is set to "Manual"
    • The traveled distance manually set by the customer is displayed.

However, when any of the following conditions is met, the "Distance Until Oil Change" content is displayed.
  • You have not set the traveled distance.
    • "Distance Until Oil Change" is shorter than the traveled distance set by the customer
Maintenance Details Engine Oil Level The engine oil level is displayed.
Distance Until Oil Change The traveled distance until engine oil needs to be replaced is displayed.
Next Service The next maintenance period manually set by the customer is displayed
Tire pressure monitor
G13718752Courtesy of MAZDA MOTORS CORP.
The current tire pressure can be checked.
  1. When tire pressures were last modified
  2. Air pressure of each tire
  3. Condition of each tire
    • When air pressure is low: Yellow color
    • When air pressure is correct: Blue color
      • When air pressure cannot be monitored: Black color
  4. Tire pressure units
Vehicle Maintenance Settings Next Service Date The method of setting the next maintenance can be selected from the following.
  • Automatic
  • Manual
Set Next Service Date If "Next Service Date" is set to "Manual", the next maintenance date can be set.
Set Next Service Distance If "Next Service Date" is set to "Manual", the traveled distance until the next maintenance period can be set.
Reset Oil Change Distance The "Distance Until Oil Change" content can be reset. After replacing the engine oil, perform the reset (engine oil data resetting) of the recorded value in this item.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.