2020 Mazda CX-30 Base, AWDFACTORY OEM SERVICE PROCEDURE

Engine Oil Level Sensor Removal/Installation

Replacement Part 

Engine oil level sensor
Quantity: 1
Location of use: Engine oil level sensor
CAUTION:
  • If the engine oil level sensor is removed, it is necessary to replace it with a new one.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
  2. Lift up the vehicle.
  3. Remove the front under cover No. 2. (See FRONT UNDER COVER No. 2 REMOVAL/INSTALLATION .)
  4. Drain the engine oil. (See ENGINE OIL REPLACEMENT .)
  5. Disconnect the engine oil level sensor connector.
    Fig 1: Engine Oil Level Sensor Nuts With Torque Specification
    G11436089Courtesy of MAZDA MOTORS CORP.
  6. Remove the clip A and clip B from the bracket.
  7. Disconnect the short cord connector.
  8. Remove the short cord.
  9. Remove the nuts.
    G11436090Courtesy of MAZDA MOTORS CORP.
  10. Remove the engine oil level sensor.
  11. Install in the reverse order of removal.
  12. Refill with the specified type and amount of the engine oil. (See ENGINE OIL REPLACEMENT .)
  13. Start the engine and confirm that there is no oil leakage.
    • If there is oil leakage, repair or replace the malfunctioning part according to the inspection results.
  14. Inspect the engine oil level. (See ENGINE OIL LEVEL INSPECTION )
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.