2017 Mazda 6 Grand TouringFACTORY OEM SERVICE PROCEDURE

Radar Unit DTCS

RADAR UNIT DIAGNOSTIC TROUBLE CODE IDENTIFICATION

DTC Description Link
SBS
C0049:85 Brake fluid level signal error (See DTC C0049:85 [RADAR UNIT] .)
C0063:54 MRCC system
initialization not
implemented
(See DTC C0063:54 [RADAR UNIT] .)
C1105:62 Brake light signal
malfunction
(See DTC C1105:62 [RADAR UNIT] .)
C1A67:04 Radar unit internal
circuit malfunction
(See DTC C1A67:04 [RADAR UNIT] .)
C1A67:4B Radar unit is outside of operation range (ignition power supply, internal temperature) (See DTC C1A67:4B [RADAR UNIT] .)
C1A67:54 Radar unit aiming adjustment not implemented (See DTC C1A67:54 [RADAR UNIT] .)
C1A67:78 Radar unit axis is deviated (See DTC C1A67:78 [RADAR UNIT] .)
C1A67:92 Radar unit sensitivity lowered (See DTC C1A67:92 [RADAR UNIT] .)
C1A96:62 Brake switch malfunction (See DTC C1A96:62 [RADAR UNIT] .)
P1697:86 Cruise control switch (DISTANCE switch) malfunction signal reception (See DTC P1697:86 [RADAR UNIT] .)
U0001:88 Module communication error (HS-CAN) (See DTC U0001:88, U0100:00, U0101:00, U0121:00, U0131:00, U0140:00, U0151:00, U0155:00, U0214:00, U023A:00 [RADAR UNIT] .)
U0100:00 Communication error with PCM
U0101:00 Communication error with TCM
U0121:00 Communication error with DSC HU/CM
U0131:00 Communication error with EPS control module
U0140:00 Communication error with front body control module (FBCM)
U0151:00 Communication error with SAS control module
U0155:00 Communication error with Instrument cluster
U0214:00 Communication error with start stop unit
U023A:00 Communication error with forward sensing camera (FSC)
U0301:09 Error signal received from PCM (See DTC U0301:09 [RADAR UNIT] .)
U0316:09 Error signal received from DSC HU/CM (See DTC U0316:09 [RADAR UNIT] .)
U0320:09 Steering angle signal malfunction (See DTC U0320:09 [RADAR UNIT] .)
U0323:00 SBS/MRCC-related warning/indication signal error (See DTC U0323:00 [RADAR UNIT] .)
U0401:00 Error signal received from PCM (See DTC U0401:00 [RADAR UNIT] .)
U0402:00 Error signal received from TCM (See DTC U0402:00 [RADAR UNIT] .)
U0415:00 Error signal received from DSC HU/CM (See DTC U0415:00 [RADAR UNIT] .)
U0420:00 Error signal received from EPS control module (See DTC U0420:00 [RADAR UNIT] .)
U0443:00 Error signal received from rear body control module (RBCM) (See DTC U0443:00 [RADAR UNIT] .)
U0515:00 Error signal received from start stop unit (See DTC U0515:00 [RADAR UNIT] .)
U2300:54 Configuration error (data not received) (See DTC U2300:54, U2300:55, U2300:56, U2300:64 [RADAR UNIT] .)
U2300:55 Configuration error (no configuration)
U2300:56 Configuration error (Ineffective/non-interchangeable data read)
U2300:64 Configuration error (error value read)
U3000:04 Mazda radar cruise control (MRCC) system operation malfunction (See DTC U3000:04 [RADAR UNIT] .)
U3000:44 Radar unit configuration information error (See DTC U3000:44 [RADAR UNIT] .)
U3000:49 Radar unit internal malfunction (See DTC U3000:49 [RADAR UNIT] .)
U3003:16 Radar unit power supply voltage decreases (See DTC U3003:16, U3003:17 [RADAR UNIT] .)
U3003:17 Radar unit power supply voltage increases
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.