2016 Mazda MX-5 Miata Club, Automatic TransFACTORY OEM SERVICE PROCEDURE

A/C Cut-off Control System Inspection

  1. Start the engine.
  2. Turn the A/C switch and fan switch (with manual air conditioner system) on.
  3. Verify that the A/C compressor magnetic clutch actuates.
  4. Fully open the throttle valve and verify that the A/C compressor magnetic clutch does not actuate for 2-5 s.
    • If it actuates, inspect the following:
      • A/C relay (See RELAY INSPECTION .)
      • Open or short to ground in wiring harness and connectors (IG1 relay-A/C relay-PCM terminal 2AF)
      • A/C related parts
      • APP1, APP2 PIDs (See PCM INSPECTION .)
RELATED PIDS

Item (definition) Unit/Condition Definition Condition/Specification (Reference)
APP1 % Accelerator pedal opening angle (absolute value) input from APP sensor No. 1
  • Accelerator pedal released: Approx. 15.29%
  • Accelerator pedal fully depressed: Approx. 90.98%
V APP sensor No. 1 voltage
  • Accelerator pedal released: Approx. 0.77 V
  • Accelerator pedal fully depressed: Approx. 4.55 V
APP2 % Accelerator pedal opening angle (absolute value) input from APP sensor No. 2
  • Accelerator pedal released: Approx. 7.84%
  • Accelerator pedal fully depressed: Approx. 45.49%
V APP sensor No. 2 voltage
  • Accelerator pedal released: Approx. 0.38 V
  • Accelerator pedal fully depressed: Approx. 2.27 V
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.