Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Load compensation inspection
- Start the engine and idle it.
- Connect the M-MDS to the DLC-2.
- Verify that P0506:00 or P0507:00 is not displayed.
- If P0506:00 or P0507:00 are displayed, perform the DTC inspection. (See DTC P0506:00 .) (See DTC P0507:00 .)
- Access the RPM PID. (See ON-BOARD DIAGNOSTIC TEST
.)NOTE:
- Excludes temporary idle speed drop just after the loads are turned on.
- Verify that the engine speed is within the specification under each load condition.
- If load condition is not as specified, inspect the following:
- A/C system (A/C request signal always on or off) (See NO. 23 A/C DOES NOT WORK SUFFICIENTLY .) (See NO. 24 A/C IS ALWAYS ON OR A/C COMPRESSOR RUNS CONTINUOUSLY .)
- Electrical load
- Charging system (See BATTERY INSPECTION .) (See GENERATOR INSPECTION .)
Idle-up speed (MTX: Neutral position, ATX: P, N position)
A/C on: 600-800 RPM (MTX), 600-830 RPM (ATX)
Electrical loads on: 650-770 RPM (MTX), 600-770 RPM (ATX)
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.