2014 Mazda 5 TouringFACTORY OEM SERVICE PROCEDURE

Control System Personalization Features Setting Procedure

  1. Connect the M-MDS (IDS) to DLC-2.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • When using the IDS (laptop PC)
      • Select the "Module Programming".
      • Select "Programmable Parameters".
      • Select menu in the BCM/GEM.
  3. Select an item name, and then select option.
    M-MDS display Function Initial setting Setting content Control unit
    2 stage door unlocking (without(AKE)) 2-step unlocking system can be set. Enabled Disabled / Enabled BCM
    Auto room lamp (when doors unlocked) The automatic illumination function of the interior light when the doors are unlocked can be canceled. Enabled Disabled / Enabled BCM
    Answer feedback (hazard) Answer back hazard can be set to inoperable. Enabled Enabled / Disabled BCM
    Answer feedback (horn) Answer back horn can be set to inoperable. Enabled Enabled / Disabled BCM
    Auto relock timer (without (AKE)) Auto re-lock operation timing can be changed. 30s 30s / 60s / 90s BCM
    Auto room lamp (when IG-OFF) The automatic illumination function of the interior light after the ignition is switched off can be canceled. Enabled Disabled / Enabled BCM
    Burglar alarm start up method Theft-deterrent system start up method can be changed. Transmitter and key Transmitter / Transmitter and key BCM
    Front wiper interlocked to window washer switch The wiper action in conjunction with the windshield washer operation can be canceled. Enabled Enabled / Disabled BCM
    Rear defroster off timer Rear defroster off timer operation timing can be changed. 15min 15min / 20min / 25min / 30min BCM
    Room lamp control time (when no transmitter is in the room) The elapsed time between the doors closing and the interior light turning off can be adjusted. 15s 7.5s / 30s / 15s / 60s BCM
    Room Lamp Battery Saver Timer The elapsed time for the interior light to automatically turn off when a door is ajar can be adjusted. 10min 10min / 30min / 60min BCM
    Room lamp control time (when the transmitter is in the room) The elapsed time between the doors unlocking and the interior light turning off can be adjusted. 30s 60s / 30s / 15s / 7.5s BCM
    Room lamp battery saver The automatic illumination function of the interior light to automatically turn off can be canceled. Enabled Disabled / Enabled BCM
    Rear wiper interlocked to window washer switch The wiper action in conjunction with the rear washer operation can be canceled. Enabled Enabled / Disabled BCM
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.