SECURITY ACCESS PROCEDURE

1. Connect the M-MDS to the DLC-2.

2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

- Select "Body"
- Select "Security"

- When using the PDS (Pocket PC)

- Select "All Tests and Calibrations".

3. Then, select items from the screen menu in the following order.

- Select "PATS Function"

4. Select the items to be performed from the following:

- Program Additional card key
- Card Key Code Erase and Program
- Steering Lock Unit Programming
- Program additional ignition key
- Ignition Key Code Erase and Program
- Customer Spare Key Programming Enable
- Customer Spare Key Programming Disable
- Parameter Reset

5. The security access begins and the M-MDS displays the "OUT-CODE".
NOTE:
- When "OUT-CODE" is first displayed, turning the ignition switch from the LOCK to the ON position 5 times will change the "OUT-CODE".

6. Input "IN-CODE" corresponding to "OUT-CODE" displayed on the M-MDS screen.

7. If the security access is successful, selected item can be performed.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Security Access Procedure

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?