2011 Mazda 3 Mazdaspeed, 2.3 3FACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 4.00 OZS. 0.11 L PAG 46 S
Air Cond Refrigerant 1.10 LBS. 0.49 KG R-134a S
Automatic Transmission Fluid 8.60 QTS. 8.13 L MAZDA Genuine ATF M-V S
Brake Fluid N/A N/A DOT 3 Brake Fluid Fill to line on reservoir. S
Engine Coolant 7.90 QTS. 7.47 L FL22 Type Engine Coolant If the "FL22" mark is shown on or near the cooling system cap, use Mazda Genuine FL22 engine coolant. FL22 type engine coolant is shipped as a diluted solution. Use the solution as is when replacing coolant. S
Engine Oil 2.3L Eng w/Filter 6.00 QTS. 5.67 L API - ILSAC, SAE 5W-30 Engine Oil S
Engine Oil 2.3L Eng w/o Filter 5.60 QTS. 5.29 L API - ILSAC, SAE 5W-30 Engine Oil S
Fuel Tank 2.3L Eng 15.90 GALS. 60.18 L S
Manual Transmission Fluid 2.3L Eng 2.60 QTS. 2.46 L API - GL-4 or GL-5: SAE 75W-90. Above 50Deg. F (10Deg. C): API - GL-4 or GL-5 SAE 80W-90 S
Power Steering Fluid N/A N/A MAZDA Genuine ATF M-III, M-V, or equivalent (e.g. DEXRON II) S
Windshield Washer Fluid N/A N/A Ultra-Clear Windshield Washer Fluid S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.