Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2009CX-9 FWD V6-3.7LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINETIMING COMPONENTSSYSTEM SPECIFICATIONSTIMING COVER
2009 Mazda CX-9 FWD V6-3.7L
Timing Cover
2009 Mazda CX-9 FWD V6-3.7LSECTION Timing Cover
Install the engine front cover and No.3 engine mount bracket bolts within 10 min of applying the silicone sealant.
Tightening torque
Tighten the engine front cover bolts in the order in 2 steps in the order shown in the figure.
Install the engine front cover bolts within 60 min of applying the silicone sealant.
Tightening torque
- Tighten to 10 Nm {102 kgf-cm, 89 in-lbf}.
- Tighten to 20-28 Nm {2.1-2.8 kgf-m, 15-20 ft-lbf}.
Tightening torque
Tighten the engine front cover bolts in the order in 2 steps in the order shown in the figure.
Install the engine front cover bolts within 60 min of applying the silicone sealant.
Tightening torque
- Tighten to 10 Nm {102 kgf-cm, 89 in-lbf}.
- Tighten to 20-28 Nm {2.1-2.8 kgf-m, 15-20 ft-lbf}.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.