Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2009B4000 V6-4.0LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINETIMING COVER
2009 Mazda B4000 V6-4.0L
Timing Cover
2009 Mazda B4000 V6-4.0LSECTION Timing Cover
Timing Cover
Position the engine front cover and install the 5 bolts and 5 stud bolts.
Tightening Torque 19 Nm {1.9 kgf-m, 14 ft-lbf}
Install the 5 cylinder block cradle-to-front cover bolts.
The 5 bolts may or may not have washers. All the bolts should be of the same type.
Tightening Torque With washers: 10 Nm {1.0 kgf-m, 89 in-lbf}
Without washers: 14 Nm {1.4 kgf-m, 10 ft-lbf}
Position the engine front cover and install the 5 bolts and 5 stud bolts.
Tightening Torque 19 Nm {1.9 kgf-m, 14 ft-lbf}
Install the 5 cylinder block cradle-to-front cover bolts.
The 5 bolts may or may not have washers. All the bolts should be of the same type.
Tightening Torque With washers: 10 Nm {1.0 kgf-m, 89 in-lbf}
Without washers: 14 Nm {1.4 kgf-m, 10 ft-lbf}
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.