2008 Mazda B2300 AutomaticFACTORY OEM SERVICE PROCEDURE

Audio Unit DTCS

AUDIO UNIT DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Action
B1342 CD ECU is Faulted DOCUMENT and CLEAR the DTCs. CARRY OUT the self-test. If DTC B1342 CD is retrieved again, INSTALL a new audio unit. See AUDIO UNIT . TEST the system for normal operation after the repair.
B1342 ECU ECU is Faulted DOCUMENT and CLEAR the DTCs. CARRY OUT the self-test. If DTC B1342 ECU is retrieved again, INSTALL a new audio unit. See AUDIO UNIT . TEST the system for normal operation after the repair.
B2103 TUNER Antenna Not Connected See PINPOINT TEST 2: POOR RECEPTION .
B2209 ECU ECU ROM Checksum Error DOCUMENT and CLEAR the DTCs. CARRY OUT the self-test. If DTC B2209 ECU is retrieved again, INSTALL a new audio unit. See AUDIO UNIT . TEST the system for normal operation after the repair.
B2404 SWC Audio Steering Wheel Switch Circuit Fault DOCUMENT and CLEAR the DTCs. CARRY OUT the self-test. If DTC B2404 SWC is retrieved again, INSTALL a new audio unit. See AUDIO UNIT . TEST the system for normal operation after the repair.
B2405 CD Audio Disc CD Player Thermal Shutdown Fault DOCUMENT and CLEAR the DTCs. CARRY OUT the self-test. If DTC B2405 CD is retrieved again, INSTALL a new audio unit. See AUDIO UNIT . TEST the system for normal operation after the repair.
B2406 CD Audio Disc CD Player Internal Fault DOCUMENT and CLEAR the DTCs. CARRY OUT the self-test. If DTC B2406 CD is retrieved again, INSTALL a new audio unit. See AUDIO UNIT . TEST the system for normal operation after the repair.
B2857 CD Audio Internal Multi-Disc Fault DOCUMENT and CLEAR the DTCs. CARRY OUT the self-test. If DTC B2857 CD is retrieved again, INSTALL a new audio unit. See AUDIO UNIT . TEST the system for normal operation after the repair.
B2858 CD Audio Multiple-Disc CD Player Thermal Fault DOCUMENT and CLEAR the DTCs. CARRY OUT the self-test. If DTC B2858 CD is retrieved again, INSTALL a new audio unit. See AUDIO UNIT . TEST the system for normal operation after the repair.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.