Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Mazda B3000 Base, AutomaticFACTORY OEM SERVICE PROCEDURE
General Specifications
GENERAL SPECIFICATIONS
| Application | Engine | Refill Approximate Liters | Refill U.S. Quarts | Fluid Type |
|---|---|---|---|---|
| 5R44E (4x2) | 2.3L | 9.4 | 9.9 | MAZDA ATF MERCON V or equivalent |
| 5R44E (4x2) | 3.0L | 9.5 | 10.0 | MAZDA ATF MERCON V or equivalent |
| 5R55E (4x2) | 4.0L | 9.5 | 10.0 | MAZDA ATF MERCON V or equivalent |
| 5R55E (4WD) | 4.0L | 9.8 | 10.3 | MAZDA ATF MERCON V or equivalent |
- Approximate dry capacity, includes cooler and lines. Fluid level indicator should be used to determine actual fluid requirements and fluid specification. Check the level at normal operating temperature. DO NOT OVERFILL if it is necessary to add or replace fluid.
SELECTIVE NEEDLE BEARINGS SPECIFICATION
| Rear (No. 4) Dimension "C" | Selective Needle Bearings (No. 4) | Identification: Notches |
|---|---|---|
| Thickness | ||
| 1.67-1.85 mm (0.066-0.073 in) | 2.65-2.80 mm (0.104-0.110 in) | 0 |
| 1.86-2.04 mm (0.073-0.080 in) | 2.80-2.95 mm (0.110-0.116 in) | 1 |
| 2.05-2.23 mm (0.081-0.088 in) | 1.85-1.90 mm (0.073-0.075 in) | 2 |
| 2.25-2.43 mm (0.089-0.096 in) | 1.95-2.00 mm (0.077-0.079 in) | 3 |
| Rear No. 4 Reference End Play | ||
| 0.20-0.54 mm (0.008-0.021 in) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.