2007 Mazda B3000 Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Window/Mirror DTCS

WINDOW/MIRROR DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Source Action
B1302 Accessory Delay Relay Coil Circuit Failure SJB See PINPOINT TEST 5: THE DELAYED ACCESSORY RELAY IS INOPERATIVE/DOES NOT OPERATE CORRECTLY , .
B1304 Accessory Delay Relay Coil Circuit Short to Battery SJB See PINPOINT TEST 6: THE DELAYED ACCESSORY RELAY DOES NOT TURN OFF/ALL WINDOWS OPERATE WITH THE IGNITION IN THE OFF POSITION , .
B1317 Battery Voltage High SJB See CHARGING SYSTEM INSPECTION AND VERIFICATION .
B1318 Battery Voltage Low SJB See CHARGING SYSTEM INSPECTION AND VERIFICATION .
B1342 ECU is Defective SJB Clear the DTCs. Repeat the self-test. If DTC B1342 is retrieved again, install a new SJB. See SMART JUNCTION BOX (SJB) , . Test the system for normal operation.
B1398 Power Window Driver One-Touch Window Relay Circuit Failure SJB Carry out the one-touch down (OTD) relay component test. Wiring Diagram, Cell 149 If the relay tests OK, INSTALL a new smart junction box (SJB). See SMART JUNCTION BOX (SJB) , . Test the system for normal operation.
B1400 Power Window Driver One-Touch Window Relay Coil Circuit Short to Battery SJB Install a new smart junction box (SJB). See SMART JUNCTION BOX (SJB) , . Test the system for normal operation.
B1405 Driver Power Window Down Switch Input Short Circuit to Battery SJB Carry out the driver window control switch component test. . If the switch tests OK, See PINPOINT TEST 7: DTC B1408 OR DTC B1410 - DRIVER POWER WINDOW SWITCH CIRCUIT SHORT TO BATTERY OR DRIVER POWER WINDOW MOTOR CIRCUIT FAILURE , .
B1408 Driver Power Window Up Circuit Short to Battery SJB Carry out the driver window control switch component test. . If the switch tests OK, See PINPOINT TEST 7: DTC B1408 OR DTC B1410 - DRIVER POWER WINDOW SWITCH CIRCUIT SHORT TO BATTERY OR DRIVER POWER WINDOW MOTOR CIRCUIT FAILURE , .
B1410 Driver Power Window Motor Circuit Failure SJB Carry out the driver window control switch component test. . If the switch tests OK, See PINPOINT TEST 7: DTC B1408 OR DTC B1410 - DRIVER POWER WINDOW SWITCH CIRCUIT SHORT TO BATTERY OR DRIVER POWER WINDOW MOTOR CIRCUIT FAILURE , .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.