Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Mazda B3000 Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Interior Lighting DTCS
INTERIOR LIGHTING SMART JUNCTION BOX DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B1322 | Driver Door Ajar Circuit Short to Ground | See PINPOINT TEST 2: THE INTERIOR LAMP STAYS ON CONTINUOUSLY , . |
| B1330 | Passenger Door Ajar Circuit Short to Ground | See PINPOINT TEST 2: THE INTERIOR LAMP STAYS ON CONTINUOUSLY , . |
| B1338 | Door Ajar RR Circuit Short to Ground | See PINPOINT TEST 2: THE INTERIOR LAMP STAYS ON CONTINUOUSLY , . |
| B1574 | Door Ajar LR Circuit Short to Ground | See PINPOINT TEST 2: THE INTERIOR LAMP STAYS ON CONTINUOUSLY , . |
| B1688 | Dome Lamp Input Circuit Short to Ground | See PINPOINT TEST 2: THE INTERIOR LAMP STAYS ON CONTINUOUSLY , . |
| All other DTCs | - | See DIAGNOSTIC TROUBLE CODE (DTC) INDEX - B, C AND U CODES , . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.