Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Mazda 6 L4-2.3LFACTORY OEM SERVICE PROCEDURE
[G35M-R, A65M-R]
Flywheel
G35M-R manual transaxle models
A65M-R manual transaxle models
Gradually tighten the flywheel lock bolts in a crisscross pattern.
Tightening torque
G35M-R manual transaxle models 108 - 115 N-m (11.1 - 11.7 kgf-m, 79.7 - 84.8 ft-lbf)
A65M-R manual transaxle models 73 - 87 N-m (7.5 - 8.8 kgf-m, 54 - 64 ft-lbf)
G35M-R manual transaxle models
A65M-R manual transaxle models
Gradually tighten the flywheel lock bolts in a crisscross pattern.
Tightening torque
G35M-R manual transaxle models 108 - 115 N-m (11.1 - 11.7 kgf-m, 79.7 - 84.8 ft-lbf)
A65M-R manual transaxle models 73 - 87 N-m (7.5 - 8.8 kgf-m, 54 - 64 ft-lbf)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.