2006 Mazda MX-5 Miata BaseFACTORY OEM SERVICE PROCEDURE

Customized Function Setting Procedure [With Advanced Keyless System]

  1. Connect the WDS or equivalent to the DLC-2.
  2. Fig 1: Locating DLC-2 Connector
    G04323300Courtesy of MAZDA MOTORS CORP.
  3. Select "Module Programming".
  4. Select "Programming change available parameter/RKE".
  5. Select the item name, and than select either "Disable/Enable".

    Items 

    • Automatic Lock
    • Answer Back Buzzer
    • Low Battery Warning
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.