Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Mazda MPV ESFACTORY OEM SERVICE PROCEDURE
Automatic Transaxle DTCS
AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Condition |
|---|---|
| P0705 | Transaxle range (TR) switch circuit malfunction (power short circuit) |
| P0706 | Transaxle range (TR) switch circuit malfunction (open circuit/ground short circuit) |
| P0711 | Transaxle fluid temperature (TFT) sensor malfunction (stuck) |
| P0712 | Transaxle fluid temperature (TFT) sensor circuit malfunction (short to ground) |
| P0713 | Transaxle fluid temperature (TFT) sensor circuit malfunction (open circuit) |
| P0715 | Input/turbine speed sensor circuit malfunction |
| P0720 | Vehicle speedometer sensor (VSS) malfunction (open circuit/short circuit) |
| P0740 | Torque converter clutch (TCC) system malfunction |
| P0743 | Torque converter clutch (TCC) solenoid valve circuit malfunction (open circuit/short circuit) |
| P0748 | Pressure control solenoid circuit malfunction (open circuit/short circuit) |
| P0751 | Shift solenoid A malfunction (stuck off) |
| P0752 | Shift solenoid A malfunction (stuck on) |
| P0753 | Shift solenoid A circuit malfunction (open circuit/short circuit) |
| P0756 | Shift solenoid B malfunction (stuck off) |
| P0757 | Shift solenoid B malfunction (stuck on) |
| P0758 | Shift solenoid B circuit malfunction (open circuit/short circuit) |
| P0761 | Shift solenoid C malfunction (stuck off) |
| P0762 | Shift solenoid C malfunction (stuck on) |
| P0763 | Shift solenoid C circuit malfunction (open circuit/short circuit) |
| P0768 | Reduction timing solenoid valve circuit malfunction (open circuit/short circuit) |
| P0773 | Neutral shift solenoid valve circuit malfunction (open circuit/short circuit) |
| P0778 | 2-4 brake solenoid valve circuit malfunction (open circuit/short circuit) |
| P0791 | Intermediate sensor circuit malfunction (open circuit/short circuit) |
| P0798 | High clutch solenoid valve circuit malfunction (open circuit/short circuit) |
| P1710 | GND return circuit malfunction |
| U0073 | CAN BUS OFF |
| U0100 | TCM cannot receive any signals from PCM |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.