2006 Mazda B3000 Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Interior Lighting DTCS

INTERIOR LIGHTING SMART JUNCTION BOX DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description DTC Caused By Action
B1313 Battery Saver Relay Coil Circuit Failure SJB See PINPOINT TEST 1: THE INTERIOR LAMPS ARE INOPERATIVE .
B1315 Battery Saver Relay Coil Circuit Short to Battery SJB See PINPOINT TEST 1: THE INTERIOR LAMPS ARE INOPERATIVE .
B1322 Driver Door Ajar Circuit Short to Ground SJB See PINPOINT TEST 2: THE INTERIOR LAMPS STAY ON CONTINUOUSLY .
B1330 Passenger Door Ajar Circuit Short to Ground SJB See PINPOINT TEST 2: THE INTERIOR LAMPS STAY ON CONTINUOUSLY .
B1342 ECU is Faulted SJB Clear the DTCs. Retrieve the DTCs. If DTC B1342 is retrieved again, install a new SJB. See SMART JUNCTION BOX (SJB) . Clear the DTCs. Repeat the self-test.
B1687 Dome Lamp Input Circuit Short to Battery SJB See PINPOINT TEST 2: THE INTERIOR LAMPS STAY ON CONTINUOUSLY .
B2477 Module Configuration Failure SJB See COMMUNICATIONS NETWORK .
All other DTCs - SJB See MODULE CONTROLLED FUNCTIONS .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.